« previous next »
Pages: [1]   Go Down

Author Topic: engine guards  (Read 3140 times)

Offline joecal

  • XH Rider XXX
  • ***
  • Posts: 29
engine guards
« on: July 30, 2013, 05:20:08 PM »
Hi Guys,
I was wondering if there are engine guards/crash bars othe than the stock ones that will fit our bikes? I really don't feel like spending an exorbitant amount on stock ones.
Thanks,
Joe
Logged

Offline 2CoolWheels

  • EH Fanatic
  • XH Rider XXXXX
  • *****
  • Posts: 277
Re: engine guards
« Reply #1 on: July 30, 2013, 06:57:10 PM »
Hi Joe,
    A full sized Harley touring bike crash bar can be made to fit. It's what I have on 901. You will have to make a bracket for the top. I used a 6" piece of 3/4" square tubing, and drilled a hole in the center of it. The, you will have to use a couple of spacers at the bottom two bolts.
   Here's the type of bar I used:
     http://www.ebay.com/itm/Engine-Guard-Highway-Crash-Bar-For-1997-2008-Harley-Touring-Electra-Glide-Flht-/380628736190?pt=Motorcycles_Parts_Accessories&hash=item589f3d98be&vxp=mtr
   Here's a short video of the completed installation. (Sorry for the poor quality of the video):
    http://www.youtube.com/watch?v=xF6IqHev-lg

Mike #741 #901
Logged

Offline joecal

  • XH Rider XXX
  • ***
  • Posts: 29
Re: engine guards
« Reply #2 on: July 30, 2013, 09:34:29 PM »
Thanks Mike,
That's some good information, the bar looks good on your bike, and the price sounds good too!
Take Care,
Joe
Logged
Pages: [1]   Go Up
« previous next »