Author Topic: Lower Shotgun pipe cracking!  (Read 4550 times)

Offline 2CoolWheels

  • EH Fanatic
  • XH Rider XXXXX
  • *****
  • Posts: 277
Lower Shotgun pipe cracking!
« on: October 22, 2014, 08:12:57 PM »
Anybody with shotguns run into the lower one cracking near the mounting bracket? Mine has cracked almost all the way around the circumference of the pipe. (I'm currently holding it together with zip ties and hose clamps!)

Offline wytfut

  • XHRC Rider Moderator
  • XH Rider XXXXX
  • *****
  • Posts: 932
  • What goes around, comes around
    • Grandpa Grumpy Pants X world        youtube
Re: Lower Shotgun pipe cracking!
« Reply #1 on: October 23, 2014, 06:02:17 AM »
How do the motor mounts look Mike?
Bruce
EH Rider X Moderator

Offline 2CoolWheels

  • EH Fanatic
  • XH Rider XXXXX
  • *****
  • Posts: 277
Re: Lower Shotgun pipe cracking!
« Reply #2 on: October 23, 2014, 01:40:15 PM »
Long story, but bottom line is they have all recently been replaced, front and rear, and they have the updated nuts from Jamie and Marty. The bike runs smooth now.

Offline rt66john

  • XH Rider XXXX
  • ****
  • Posts: 113
Re: Lower Shotgun pipe cracking!
« Reply #3 on: October 24, 2014, 11:22:30 AM »
How's the mounting bracket itself?

Offline 2CoolWheels

  • EH Fanatic
  • XH Rider XXXXX
  • *****
  • Posts: 277
Re: Lower Shotgun pipe cracking!
« Reply #4 on: October 24, 2014, 06:14:52 PM »
Mounting bracket is fine.

Anybody know where I can get a new set of shotguns? If not, I'll take it to an exhaust specialist and have a new one made up.

Offline Jumper

  • XHRC Rider Moderator
  • XH Rider XXXXX
  • *****
  • Posts: 423
Re: Lower Shotgun pipe cracking!
« Reply #5 on: October 24, 2014, 06:53:00 PM »
Hmmm... Ditch the Shot Guns!!! The Guy riding beside you on the Right will thank you!!! Heheheh..
Jumper

Offline wytfut

  • XHRC Rider Moderator
  • XH Rider XXXXX
  • *****
  • Posts: 932
  • What goes around, comes around
    • Grandpa Grumpy Pants X world        youtube
Re: Lower Shotgun pipe cracking!
« Reply #6 on: October 25, 2014, 07:36:43 AM »
Mike,
    Believe it or not.... But i have a pair of long shot guns you can have, ..... Havent looked at them for a while.....
    But in good straight shape.....
    Chrome is junk.... But no dinges.... Have them rechromed or powder coated.
    Ill be in the shop today and check them over....
     You pay for shipping....... They are yours
Bruce
EH Rider X Moderator

Offline 2CoolWheels

  • EH Fanatic
  • XH Rider XXXXX
  • *****
  • Posts: 277
Re: Lower Shotgun pipe cracking!
« Reply #7 on: October 25, 2014, 05:36:11 PM »
Wow, thanks Bruce!!!

Berlin Bob

  • Guest
Re: Lower Shotgun pipe cracking!
« Reply #8 on: October 28, 2014, 06:13:27 AM »
The bottom one always cracks because of vibration and most important is that it is the longest one and leverage has alot to do with it ...it does extend longer than the rear pipe ...I had a set and it did the same thing   ...so I tossed 'em  ...used the shorter one as a guide to make short pipes sets

berlin  bob

Offline franknsr

  • XH Rider XXXXX
  • *****
  • Posts: 266
Re: Lower Shotgun pipe cracking!
« Reply #9 on: October 28, 2014, 06:38:51 PM »
Might be worth it to weld a piece of square stock to the back of last 3 feet of Bruce's old pipes before rechroming them. Maybe you'll get a little more life out of them.

Reminds me that back in the day I made up some looooong pipes that stuck out about a foot beyond my rear fender. They dragged going into gas stations and my local wrench hated them, kept walking into them on the lift, but damn they were cool.

Offline 2CoolWheels

  • EH Fanatic
  • XH Rider XXXXX
  • *****
  • Posts: 277
Re: Lower Shotgun pipe cracking!
« Reply #10 on: October 29, 2014, 05:47:35 PM »
Good idea Frank, I'll look into it.